|
This auction is for window (panel) only. The image is what the panel looks like when installed. See below for specifications
It was only a matter of time before people realized that the inside of a computer looks extremely cool, and server towers are the best of all! If you have dual processors, RAID configurations, and rounded cables galore, then its time to turn off the lights and open the window. Check your case size, but this will fit most any Midtower and above.
Specifications:
Laser Cut
Dimensions: This is a reverse "L" shaped window. Dimensions:14" wide, 18 1/2" tall, minus a 5" X 7 1/2" section in upper left quadrent.
Note:
The server tower window kit was orginally designed for the the Lian Li PC70 server tower and all the 'knock offs'. However it will most likely work on your Case as long as you double check the area you need to cut and ensure you have ample room. Please verify the kit is right for your case by checking the diagram and inspecting your case for fit and function.
Hole size dimensions are approximate and provided for estimation of suitability for the proposed installation.
Full WIndows kit with edging, etc. and instuctions is available only by clicking the following image:  | 
)
