DECAL / STICKER
Size: Approx. 5.0 in x 6.5 in
(12.7 cm x 16.5 cm)
Post this great looking decal on your car widow and
let others know about your passion ... drums!
Our die cut stickers & decals are made from high quality white vinyl
and are designed to last up to 5 years on the exterior of automobile
windows ... indefinitely on drum heads.
Application Instructions for Vinyl Stickers & Decals:
Materials Needed:
Glass Cleaner, Paper Towels, Masking Tape, Squeegee or Credit Card, Exacto Knife
| 1. |
Ensure Stick |
Place decal on flat, sturdy surface. Using either a squeegee or credit card, rub over clear transfer tape to ensure decal adheres to, and will transfer with, the clear tape. |
| 2. |
Clean Surface |
Make sure the surface you will be applying the decal to is clean and completely dry. |
| 3. |
Align Decal |
Align decal on outside of window (or on drumhead surface**) so that it is in the exact location you would like it. Place a strip of masking tape across the top of decal. This will help ensure it stays in the correct location during transfer. |
| 4. |
Remove Backing |
Lift decal and pull away the white backing paper a few inches at a time. Make sure the lettering sticks to the transfer tape and not the backing paper. Your Exacto knife can be used to gently push stray letters back into place. |
| 5. |
Apply Decal |
Use credit card, squeegee, or other object with a smooth edge, to apply the decal. Do not let the bottom of decal touch the surface prematurely. Starting at the top center, apply decal with overlapping strokes. Work down and toward each edge. With transfer tape still in place, rub over entire surface of decal with credit card to ensure proper application. |
| 6. |
Remove Transfer Tape |
Remove clear transfer tape by carefully pulling at a 45° angle. If letters begin to pull up with the transfer tape, they have not been applied firmly enough. Using your squeegee, go over the lettering again with firm overlapping strokes then once again attempt to remove the transfer tape. |
** Caution: Vinyl Stickers and Decals will not adhere to coated drum heads.
2008 Copyright
Designed & Distributed by:
|
)