* NEW *
ExtendFlex2 tm

Extended Flexible Focuser
fits Meade ETX series of scopes
Models 60, 70, 90, 105, 125 (AT, RA, EC, PE)
This will also fit the DSX 90 and DSX 125

Please include model number with payment!

Note:
(Does NOT fit the ETX 80 or the "BB" Back Pack versions)
The "BB" can be found in your models description.
These scopes have the focus knob vertical to the OTA.

Soon after I started using my  ETX scope I found that the focus knob was put in the most impossible to access place. Ever try to focus your ETX when the scope is looking up toward zenith?

Since I also wanted a larger focusing knob I set out to assemble one that would work well for me and came up with the ExtendFlex extender. I have friends that love it, so, I thought why not give fellow astronomers, ETX users, the chance to get one at a great buy!

The "new" ExtendFlex2 tm comes with an aluminum knurled knob
and coupler permanently attached to the cable.

I have them ready to go, completely assembled and ready to install with instructions.

ExtendFlex2 tm

INCLUDES 
 - KNURLED ALUMINUM  KNOB -
for very fine focusing.

The knob is permanently attached to the cable as well as the coupler.

ExtendFlex2 tm will not interfere with your scope's goto capabilities.
Made of proper balance, length and flexibility yet small enough
to allow you to store your scope in it's case while installed.

See my feedback for recent purchasers delight in them.

NO RESERVE AUCTION!
 

Focusing your ETX scope is now made easy with the ExtendFlex2 tm extender.

When the ETX telescope acquires a zenith position or on a polar mount, the original location of the focus knob becomes virtually impossible to reach.

ExtendFlex2 "pictured above" resting behind the eyepiece socket of an ETX 90 EC
You can get at zenith and still focus.
This is a radical bend (almost 180 degrees) where
most observations are from 15 up to 90 degrees
 

ExtendFlex2 tm

Uses a machined coupler, permanently attached to the cable
One set screw mounts it to your scope

Easy 2 step installation.

Remove the original focus knob
using the Allen wrench that
came with your ETX scope.

Install the ExtendFlex tm
to your focus shaft
using the supplied Allen wrench.
One screw out, one screw in, that's it!

You get the ExtendFlex2 tm "complete"
as pictured to the left.

In fact, ExtendFlex2 tm includes
a longer machined aluminum and knurled focusing knob which makes fine tuning a snap.

ExtendFlex2 tm is vinyl coated, which will give a smooth glide and feel as you focus your images.

FLEXIBLE!

EASY TO TURN

Please note that the two "movies" above shows our other style cable with the large plastic knob.

The ExtendFlex2 tm operates the same.

If you do not use these methods,  please email your name and complete shipping address so I can email you final figures, as well as get your package ready. Please include item number or description as well as your Ebay ID on all correspondence. Thank You!

Attention bidders
I believe in a proper custom fit.
Focus shaft sizes differ on some models.

Please state your ETX telescope model number
60,70, 90, 105, 125 or DSX 90
in an email, or in PayPal's notes, when purchasing.

(This will NOT fit the new ETX 80)

******   NOT PROVIDING THE ABOVE INFORMATION  ******
WILL CAUSE SHIPPING DELAY
____________________________________________________________

Flat shipping & handling charge worldwide
$5.00

US ONLY: Optional Insurance is  $1.30

We ship them in sturdy bubble mailers and include instructions.

Immediate shipment once confirmed credit card PayPal payment is received.

Payment, including credit cards, are accepted through PayPal Worldwide
my preferred method of payment.

Will accept checks or money order on USA shipments only.
Payment by check or money orders will ship same day I receive payment.

You can click on the PayPal link in this auction to purchase.