This is a mixed lot of fittings. All are new fittings and a few are old stock unused fittings all are 100% ready to put into service. I broke them down by picture number.
I loaned my son my 79 camaro last fall so he could get his car repaired. He brought it back with a blown engine. So the money I make on ebay is going towards resurrecting the dead ! lol
Thanks for looking
Picture # 1 :
1 EA : 1/4" M x 1/4" F Parker 600 LB ball valve
1 EA : 1/4" F NPT CHECK VALVE 5000 PSI # C400S Parker. 5 GPM . I remember paying about $35.00 for this.
3 EA : 1/4" Hydraulic hose's M x F NPT ends - Non swivel 6 3/4" long
_______________________________________________________________
Picture 2 :
2 EA : 1/2" SS Tube Swagelok 90* Elbows
1 EA : 3/8" SS Tube 90* Elbow
1 EA : 3/8" tube x 3/8" M NPT Swagelok adapter
1 EA : 1/2" tube x 1" M - NPT STEEL Adapter Swagelok
1 EA : 3/4" Tube x 3/4" M NPT Steel Swagelok adapter
____________________________________________________________________
Picture 3 :
3 EA : Steel 1 1/4" x 1 1/2" NPT Bushing
3 EA : Steel 3/4" x 1 1/2" NPT Bushing
_____________________________________________________________________
Picture 4 :
ALL PARKER FITTINGS
1 EA : 3/4" 90* elbow M x F NPT
1 EA : 1/2" 90* elbow M x F NPT
4 EA : 1/4" street elbows NPT
2 EA : 1/4" x 1/4" F 90* elbows NPT
2 EA : 1/8" NPT 90* street elbows
7 EA : 1/4" x 1 1/2" long nipples
2 EA : 1/8" x 1" long nipples
4 EA : 1/4" couplers
1 EA : 1/8" Coupler
2 EA : 1/4" tube x 1/4" M NPT adapters
2 EA : 3/8" tube x 1/4" M NPT adapters
1 EA : 1/4" Swivel F NPT x 1/4" M NPT Adapter
_____________________________________________
Picture 5 :
High pressure SS Fittings
9 EA : 1/4" SS Couplers
5 EA : 1/4" x 1/8" SS Bushings
7 EA : 1/4" x 1" long SS nipples in blue plastic covers
_________________________________________________
Any idea how long it took me to type all this with 1 finger ?
Thanks for looking
)